If you are having problems with your Bosch washing machine spin cycle, this guide will provide steps on how to fix them…
Table of Contents
Bosch Washing Machine Spin Not Working — How To Fix
Is your Bosch washing machine spin cycle not working? If so, here are the issues to look for…
1. Worn Drive Belt
The drive belt is looped around the drive pulley at the back of the machine. As the belt rotates, the drum is rotated as well. Your washing machine will not be able to spin if this belt breaks or gets worn. To learn how to replace your washing machine’s drive belt, read this article.
2. Failed Drive Motor
When charged with an electrical current, the drive motor makes the drive belt rotate. If this motor gets damaged, your machine will not be able to perform any wash cycles. Read this article to learn how to replace this part.
3. Door Isn’t Locked
As a safety precaution, most washing machines will not initiate a cycle unless the door has been locked. Ensure that you firmly shut your washer’s door before starting a spin cycle. If your machine’s door isn’t locking, you’ll need to replace the lock assembly. Click here to learn how to do this.
4. Warped Drum Bearings
The bearings are mounted inside the rear half of the outer tub. The bearings help the inner tub spin smoothly and evenly. If the bearings get damaged, your machine may not be able to spin anymore. Read this article to learn how to replace bearings.
Bosch Washing Machine Not Draining Or Spinning — Solution
If your Bosch washing machine isn’t draining or spinning, here are the issues to look for…
1. Blocked Drain Pump Filter
The drain pump filter at the lower front section of your washing machine accumulates lint and debris over time. If your washing machine stops draining, you most likely need to clean the filter. To learn how to do this, click here.
2. Faulty Pump Assembly
If cleaning the pump filter didn’t resolve the issue, the next thing you should check is the drain pump itself. If the pump gets damaged, your machine will be unable to drain any water. For more information on how to replace a drain pump in your machine, read this article.
Check out these other articles…
Bosch Washing Machine Error Codes [Meanings & Solutions]
Bosch Washing Machine Bearings [How To, Issues & Solutions]
Bosch Washing Machine Flashing [Problems & Solutions]
How To Install A Bosch Washing Machine [Detailed Guide]
Bosch Washing Machine Cycle [Detailed Guide & Solutions]
Bosch Washing Machine Spins Violently — Solved
If your Bosch washing machine spins violently look for the following issues…
1. Legs Are Unbalanced
If your Bosch washing machine spins violently, the first thing you should check is the legs. Place a spirit level tool on top of the machine to ensure that it is balanced.
If you notice that one of the legs isn’t on the same level, tip the machine backwards and adjust as needed using a spanner. In order to help your washer stay balance, ensure that the machine sits on a firm, even surface.
2. Damaged Suspension Spring
The suspension springs hold the tub assembly to the cabinet. If one of the springs gets damaged, the drum will become unbalanced. As a result, the machine will spin violently. To learn how to replace the suspension spring in your Bosch washing machine, read this article.
3. Defective Shock Absorber
The shock absorbers are mounted at the bottom of the tub and prevent the machine from shaking excessively. In order to prevent your machine from shaking violently, you’ll need to replace a shock absorber if its damaged. To learn how to do this, click here.
4. Broken Spider Support Arm
The spider support arm at the back of the inner tub helps the assembly stay balanced when spinning. If you notice excessive shaking during spin cycles, you’ll need to replace the spider support arm. Read this article to learn how to do this.
Bosch Washing Machine Spin Only — Quick Fix
To run a spin cycle in your Bosch washing machine, here are the steps you’ll need to take…
Step 1. Plug your washing machine into the electrical outlet and load the clothes into the drum.
Step 2. Turn your washer’s selector knob to the Rinse/Spin option. You should see the Aqua Plus button light up; press to turn it off (this will deactivate the rinse).
Step 3. Start the spin cycle by pressing the start button.