If your Candy washing machine noise is bothering you, this guide will explain the causes and give you steps on how to fix them. With that being said, let’s get right to it…
Table of Contents
Candy Washing Making Noise When Spinning — Solved
Is your Candy washing machine making noise when spinning? If so, look for the following issues…
1. Drive Belt
If the drive belt of your washing machine is worn out, you may begin to notice a noise during spin cycles. To fix this issue, you’ll need to replace the drive belt. Click here to learn how to do this.
2. Drive Motor
The drive motor is very crucial for a washing machine to spin. If it starts to fail, you will start to hear a noise from your washing machine. You will have to replace the motor in order to resolve this issue. Read this article to learn how to do this.
3. Drive Pulley
The drive pulley is mounted at the back of your washing machine. This part turns the tub when the drive belt rotates. If it gets damaged, a noise will be emitted whenever the drum turns. Here’s how to replace drive pulley on your washing machine…
Step 1. Ensure that you turn off your washing machine’s water supply and unplug the power cord before attempting any repairs in order to prevent any chances of water leakage and electrocution.
Step 2. Use a Philips screwdriver to take out the screws at the back of your washing machine holding the rear panel. Pull the panel off the washing machine and set it aside.
Step 3. Carefully rotate the drum and pull the drive belt off the drive pulley and set it aside. Use a 15/16 inch socket wrench to take out the nut at the back of the tub securing the drive pulley.
Step 4. Carefully pull the drive pulley off the tub and set it aside. Take your new drive pulley out of its packaging and install it onto the shaft at the back of the tub. Apply the bolt with your 15/16 inch socket wrench to secure the new drive pulley.
Step 5. Carefully fit the drive belt around the drive pulley and motor shaft. Put the rear panel of your washing machine back on and apply the screws with your Philips screwdriver to secure it.
Step 6. Turn on your washing machine’s water supply and plug the power cord back in. To make sure the issue has been fixed, try running a spin cycle.
4. Tub Bearing
The tub bearing ensures that the drum spins smoothly. If it is damaged, you will begin to notice a grinding and knocking sound when the washer is spinning. Click here to learn how to replace the tub bearing in your washing machine.
Check out these other articles…