Are you wondering how to wash 9×12 Ruggable? Ruggable rugs are known for being easy to clean, but a 9×12 size requires a bit more attention. This guide will offer clear, step-by-step instructions to help you get the job done seamlessly.
Table of Contents
How to Wash 9×12 Ruggable: Gathering Necessary Materials
Before diving into how to wash 9×12 Ruggable, make sure you have the following materials ready:
Removing the Rug Cover
The first step in learning how to wash 9×12 Ruggable is to remove the rug cover from its pad. This can be a bit challenging due to the rug’s large size, but following these steps will make it manageable.
Start by rolling up the rug into a cylindrical shape. This makes it easier to handle and reach the corners effectively.
Next, begin by carefully detaching one corner of the rug cover from the pad. Use both hands to lift the edge of the cover away from the Velcro-like fasteners.
Proceed to detach the remaining corners, working your way around the rug. Once all corners are free, gently roll the rug cover off the pad and set it aside for washing.
Preparing for the Wash
Preparation is essential when learning how to wash 9×12 Ruggable effectively. Taking the right steps can ensure a cleaner rug and protect its durability.
First, shake off any loose debris or dirt from the rug cover. You can do this by taking it outside and giving it a few vigorous shakes.
Check the care label attached to the rug to confirm that it is machine washable. This is usually found on one of the corners or sides. Turn the rug cover inside out to protect the design and colors from fading during the wash.
For more articles on how to wash, click here: How to Wash: Your Comprehensive Guide to Clothing and Fashion Care
Machine Washing the Rug
Now that you’ve prepared your 9×12 Ruggable rug, you’re ready to proceed with the actual washing. Follow these steps to ensure a thorough clean. Place the rug cover inside your washing machine, making sure it is evenly spread to balance the load.
Pour a mild laundry detergent into the machine. Avoid using bleach or harsh cleaners as they may damage the fabric.
Set your washing machine to a gentle or delicate cycle with cold water to prevent any shrinkage or color bleeding. Start the washing cycle and wait for it to complete.
Drying the Rug
After the washing cycle is complete, the next step is to dry your rug properly. A few simple steps can make this process smooth and effective.
Carefully remove the rug cover from the washing machine, avoiding any twisting or wringing that could distort its shape.
Place the rug cover in your dryer and set it to a low heat or air-dry setting. High heat can cause shrinkage or damage. Run the dryer until the rug is completely dry. Check periodically to prevent over-drying.
Reassembling Your Rug
Congratulations, you’ve successfully learned how to wash 9×12 Ruggable! Now it’s time to put your clean rug back together and enjoy its freshness. Begin by laying the pad flat on the floor in the location where you want the rug to be.
Take the clean, dry rug cover and align it over the pad, ensuring it’s centered and matches up with the corners of the pad.
Attach one corner of the rug cover to the pad, pressing down firmly to secure it. Repeat for the remaining corners. Once all corners are attached, smooth out any wrinkles or folds to complete the reassembly.
Conclusion
In conclusion, learning how to wash 9×12 Ruggable rugs is straightforward when you follow these step-by-step instructions. With proper preparation, washing, drying, and reassembling, you can keep your rug looking fresh and extend its lifespan.
