Samsung Washing Machine Error Codes [How To Fix]

A Samsung washing machine error code brings fear and panic to many users. If you are one of these people, don’t worry; you’ve come to the right place. In this guide, we’ll be showing you how to deal with different error codes.

SAMSUNG 4.5 Cu. Ft. White Front Load Washer

Table of Contents

How To Fix Samsung Washing Machine Error Code AC6

The AC6 error indicates that there is a communication problem between the display board and the machine’s control module.

To troubleshoot this problem, simply disconnect the machine from it’s power source and connect it again. Start a new cycle when you turn the machine on again. If the error code does not appear again, it may have just been a temporary glitch.

On the other hand, if the problem still occurs, you may have to get a professional to look at the machine.

How To Fix Samsung Washing Machine Error Code AE

This message indicates a communication issue between your washer’s control module and the its display board.

To resolve this problem, all you have to do is disconnect your washing machine from its power source. This will reboot the system and get rid of any glitches.

Turn your washer back on after about 5 minutes. If the error message pops up again, this indicates a more serious issue. If this occurs you may have to contact Samsung technicians to take a look at your washer.

How To Fix Samsung Washing Machine Error Code BE2

This error code pops up when any button except the power button is held for a long period of time. The solution to this is very simple; all you need to do is unplug the machine for about 6 minutes and then plug it back again.

How To Fix Samsung Washing Machine Error Code BE1

To fix this error message you simply have to shut your washing machine down for a few minutes and then powering it up again. This message pops up if someone holds the power button down for 13 seconds or longer.

What Is SUD Error In a Samsung Washing Machine?

This error indicates that there is excessive foaming during wash cycles. This is often caused by using the wrong type of detergent in your washing machine, or filling the soap dispenser past the maximum mark.

How To Clear SUD Error In A Samsung Washer

To clear SUD errors in a Samsung washing machine, take a look at the detergent you are using. If it wasn’t made for automatic washing machines, it may cause excessive foaming.

Also ensure that you haven’t filled the soap dispenser past the maximum mark. This will reduce the amount of suds that are formed during wash cycles.

How To Fix Samsung Washing Machine 4E Error

This message indicates that there is a problem the water supply. Most times this problem is the result of having a kinked or blocked water supply hose.

To troubleshoot this problem, ensure that your washing machine’s water source is opened completely. If the if it is opened partially, the washer won’t receive water as quickly as it should.

Next, check the hose which carries water to the washer. Ensure that it isn’t bent or damaged.

Finally, you need to check the water inlet filter for blockages. To do this, turn of your washer’s water supply. Disconnect the water inlet hose from the washer.

The inlet filter will be located inside that end of the hose. Use a pair of pliers to gently pull it out. Rinse out any dirt on the filter by running some tap water over it. Once its clean, put the filter back in its place.

Now you can connect the water supply hose to the washer. Turn the water supply valve on to ensure that there is no leakage. Run a wash cycle to ensure that the issue has bee resolved.

How To Fix Samsung Washing Machine DE Error

A DE (LO, D5, FL, or DF in some washers) error on a Samsung washing machine indicates that the door isn’t properly locked. Before attempting any technical repairs, ensure that the door is properly shut.

If your washing machine door isn’t locking, this means the door lock is defective. Here’s how to replace it…

Step 1. Unplug your washer from its power and water supply.

Step 2. Open your washing machine door.

Step 3. Using a screwdriver, gently pry out the metal band holding gray seal around the door opening.

Step 4. Peel the gray seal back from the right side.

Step 5. Use your screwdriver to remove the two screws holding the door lock.

Step 6. When you remove the screws, you will find a plug with three wires at the bottom of the door lock.

Step 7. Disconnect the plug and inspect the door lock for burns.

Step 8. If you notice any damage to the door lock you will need to get a new one.

Step 9. Once you’ve gotten your new door lock, connect it to the plug you removed the old one from.

Step 10. Screw the door lock back in place.

Step 11. Fit the gray seal in place.

Step 12. Run the metal band back around the seal (use a flat-head screwdriver to get the spring underneath the seal if needed).

Step 13. Run a wash cycle to see if the problem has been resolved.

How To Fix Samsung Washing Machine UE Error

This error code indicates an unbalanced load. Most times it pops up when the washer has entered a spin cycle. Ensure that you have not filled the washer up with too much laundry.

On the other hand you also need to ensure that enough laundry has been put into the machine. If the load is to big or too small, the washer spin.

Another thing you need to check is the positioning of the washer. Ensure that it sits on an even surface. The washer won’t spin if it is tilted at an angle.

How To Clear Samsung Washing Machine Error Code 6E

The 6E (6C in some washers) error code indicates an issue with either the thermistor or heating unit. The process of replacing a heating unit will vary depending on your washer model.

If you don’t have much experience with this kind of repair, you risk damaging your unit. This repair can only be carried out by professional technicians.

How To Clear Samsung Washing Machine Error Code OC

This error pops up when the drum gets overfilled with water. This can be caused by a blocked water inlet valve. This means the water valve won’t be able to shut off. This causes the drum to overfill.

Another thing that could cause this problem is using the wring type of detergent. If the detergent you use isn’t meant for washing machines, it will cause excessive foaming. The washer will then try to add more water to reduce the foam.

On the bright side, it may simply be a minor system glitch. This can be fixed by disconnecting your washer from its power source for about 5 minutes and then plugging it back. This will reset any system glitches.

If this doesn’t fix the problem, you should take a look at the type of detergent you are using. Ensure that it was made for washing machines. Finally, you should clean the water inlet filter.

To do this, turn off your washing machine’s water supply. Disconnect the water inlet hose from the back of the washing machine. Using a pair of pliers, gently pull out the little mesh filter inside the machine’s water inlet hole.

Clean the filter by running some tap water over it. Once it has been thoroughly cleaned, put it back in place. Afterwards, connect the water inlet hose back to the washer and turn on the water supply. Run a wash cycle to ensure that it is working properly.



Check out these other articles…

Samsung Washing Machine Not Draining Or Spinning [Easy Fix]

How To Drain Water From A Samsung Washing Machine [Detailed Guide]

Why Won’t My Samsung Washing Machine Unlock? [Causes And Solution]

How To Calibrate A Samsung Washing Machine [4 Methods]

Samsung Washing Machine Child Lock [Issues and Quick Solutions]

Samsung Washing Machine Does Not Fill With Water [3 Common Causes And Solutions]



How To Clear Samsung Washing Machine NF Error Code

This error code indicates that the washing machine is not being filled with water. In most cases this can be solved simply by turning on the washer’s water supply. In other cases, your water supply may be frozen.

Another common cause of this problem is a clogged water inlet hose. If your washer’s inlet hose is blocked, the machine won’t be able to receive water.

Turn of your washer’s water and power supply. Disconnect your water inlet hose from the back of your washing machine. Turn the water supply back on for a few seconds to see if the hose is blocked.

Use some garden wire to clear any debris that may be obstructing water flow in the hose. Once the hose is clear, put it back in place.

If the error still pops up, your washer may have a more serious issue. If that is the case in your situation, you have to seek professional assistance.

How To Clear Samsung Digital Inverter Washing Machine Error Code 4C

The 4C error code indicates an issue with water supply. It pops up when the water supply hose is kinked or blocked. Here simple things you can do to troubleshoot this problem.

First of all, ensure that the water supply hose isn’t kinked or bent. This will help ensure proper water flow. Also ensure that your water valve is fully opened.

Finally, you should check the water inlet filter. Turn off your washer’s water supply and unscrew the water inlet hose from the back of the machine. Using a pair of pliers, carefully pull out the mesh filter at the end of the hose.

Run some tap water over the filter until it is thoroughly cleaned. Afterwards, put the filter back in place. Connect the filter back to the machine and turn on the water supply. Run a wash cycle to ensure that the error is gone.

Note: This fix works for all types of Samsung washing machines.

How To Clear Samsung Digital Inverter Washing Machine Error Code 5C

The 5C Samsung washing machine error code (SC, 5E, or SE in some washers) indicates a drainage problem. Here’s how to fix this issue:

Step 1. Turn off your washer’s water and power supply.

Step 2. Place some towels and a shallow tray in front of your washer (front loaders only).

Step 3. Press the panel in front of your washer at the bottom (front loaders only).

Step 4. Pull out the small capped hose underneath the panel (front loaders only).

Step 5. Pull out the hose’s cap and drain out any water in the machine into your tray (front loaders only).

Step 6. Put the hose back in place (front loaders only).

Step 7. Turn the debris filter beside the drain hose counterclockwise and pull it out (front loaders only).

Step 8. Clean out any dirt or lint in the filter and screw it back in place (front loaders only).

Step 9. Cover the panel (front loaders only).

Step 10. Go to the back of your washing machine.

Step 11. Inspect the hose. Ensure that it hasn’t been inserted more or less than 6 inches into your home drain.

Step 12. Ensure an airtight connection hasn’t been formed between the home drain and the drain hose.

Step 13. Ensure that the hose isn’t bent or kinked.

Step 14. Run a wash cycle to see if the problem has been resolved.

Note: This fix will also work for other types of Samsung washing machines.

How To Clear Samsung Washing Machine Error Code HOT

Don’t worry if this message pops up in your washing machine’s display. It’s not actually an error code. It just indicates that the washer is too hot for you to remove the laundry. This message only pops up when you do a boil wash.

Once the temperature drops to about 55 degrees Celsius, you should be able to get your clothes out.

How To Fix Samsung Washing Machine Error Code ND

This error code means “Not Draining”. You can fix this problem by going through the following procedure:

Step 1. Disconnect your washer from its power and water supply.

Step 2. Get a bowl and some towels.

Step 3. Place the towels and the bowl on the ground in front of your washing machine. (front loaders only).

Step 4. Press the little panel in front of the machine at the bottom (front loaders only).

Step 5. Pull out the capped hose underneath the panel by about 5 inches (front loaders only).

Step 6. Pull out the cap from the hose and drain any water in the machine into your bowl (front loaders only).

Step 7. Look for the debris filter located beside the capped hose (for top loaders, this will be found inside the drum).

Step 8. Turn the filter knob counterclockwise to bring it out.

Step 9. Remove any lint or dirt that may have clogged it.

Step 10. Put it back in place by turning it clockwise.

Step 11. Go to the back of the washing machine.

Step 12. Ensure that the drain hose hasn’t been inserted less than 6 inches into your home drain. It also shouldn’t exceed 6 inches.

Step 13. Ensure that the hose doesn’t have any bends or kinks.

Step 14. Turn on water and power supply.

Step 15. Run a wash cycle to see if the problem has been fixed.

How To Clear Samsung Washing Machine Error Code DC

The DC (DDC in some washers) Samsung washing machine error code shows when the load inside the washer isn’t balanced. As a result the washer won’t spin.

To fix this issue, you need to ensure that the load is evenly distributed in the drum. You also need to ensure that the washer sits on an even surface. If the machine is sitting at an angle, it won’t be able to spin properly.

How To Fix Samsung Washing Machine Error Code UB

The UB (UR, UL, or U6 in some cases) error in a Samsung washer indicates that there is either too little or too much laundry in the drum. This error may also pop up if you don’t spread the load evenly in the drum.

You also need to ensure that the washing machine is sitting on a even surface. If the machine sits at an angle, it could cause this error to show up. When it does, the drum won’t be able to spin properly.

How To Reset Samsung Washing Machine Error Code OE

This Samsung washing machine error code error code indicates that the drum is overfilled with water. Fortunately, resolving this issue isn’t difficult. The first thing you should check when the message shows up is your detergent.

If the detergent you are using wasn’t made for washing machines, it could cause excessive foaming. As a result, the washer will try to reduce the foam by adding more water. This in turn leads to the OE error.

Next, you should check the water inlet valves. When your washer is filling up with water, disconnect it from its power source. If water is still running when the appliance is disconnected, it means the water valves are faulty and need to be replaced.

You should keep in mind that this error code could be a minor system glitch. Try unplugging the unit from its power source for about 5 minutes. Afterwards, run a wash cycle to see if the error still shows. If it does, you may have to seek professional assistance.

What Does The Code 4E Mean On A Samsung Washing Machine?

The 4E error code indicates an issue with the washer’s water supply. This can be caused by a blocked or kinked inlet hose, or a frozen water supply.

What Is 2H Error In A Samsung Washing Machine?

First of all, you need to keep in mind that this isn’t an error code. This message only shows up in washer displays that have two characters. It indicates how much time is left for the washing to complete.

The “H” stands for hours. This means the 2h code indicates that the wash cycle will end in roughly 2 hours. Once the time has gone down to 99 minutes or less, the machine will start displaying numbers normally. This also applies to the 3H and 4H error codes.

What Is Samsung Washing Machine Code SUD5?

The SUD5 (SUD or SD for some washer models) Samsung washing machine error code indicates that there is excessive foaming in the machine. This often occurs if you use the wrong type of detergent, or if you use too much detergent. You don’t need to be worried if this message appears on your washer.

The machine will stop the wash cycle for a while so that the suds will dissipate. Once the foam has reduced, the cycle will resume.

How To Fix Samsung Washing Machine Error Code EE

This message indicates a minor glitch in the system’s control board. This code can be cleared by simply disconnecting the washer from its power source for about 10 minutes. Afterwards, you can plug the machine back.

How To Clear Samsung Washing Machine Code 3E

The 3E (3C in some washers) Samsung washing machine error code indicates that the washer’s motor isn’t working. Different things could cause this issue; however, before starting any repairs, check the power outlet.

Try connecting another device to the power source to see if it works. If the device doesn’t function properly, this means that the power outlet is defective. Connecting your washing machine to another power outlet should resolve this issue.

If this fix didn’t work, check the amount of laundry in the washer. If the drum is too full, the motor won’t be able to spin properly. Ensure that the load is evenly spread in the drum.

If this also didn’t fix your problem, you may have a more serious issue. Please consult a professional technician if this is the case.

How To Check Error Codes On A Samsung Top Load Washer

Before you can check any error codes on your Samsung top load washer, you need to get into service mode.

To do this, simply press and hold the Extra Rinse and Delay Start buttons at the same time until you hear 3 beeps. You should also see 2 zeros on the display; this indicates that the washer is now in service mode.

To get to the error codes function, press the Spin button. If your washer doesn’t have any errors, a “d” should appear on the display. If the machine has shown an error recently, it will now appear on the display.

If the washer has multiple errors, you can use the knob dial (if available) to scroll through the messages. To leave service mode, simply press the power button.

Useful Tip: When the washer is in the error code function, you can see how many wash cycles have been completed since that error appeared. Do this by holding the Start/Pause button.

How To Fix Samsung Washing Machine Error Code 8E

The 8E Samsung washing machine error code (8E1, 8E2, or 8C in some washers) indicates a problem with the vibration sensor. This sensor measures the frequency and amount of vibration in your washing machine. This helps the washer detect any imbalances and prevent future break downs.

If this sensor fails, it will need to be replaced. If you aren’t confident with your appliance repair skills, please call a professional repair service to help you out. On the other hand, if you are comfortable with DIY, refer to the video below to learn how to replace your washer’s vibration sensor.

Note: Please keep in mind that the process of replacing a vibration sensor may vary depending on your type of washer.

How To Fix Samsung Washing Machine Error Code 5R

The 5R error code (IE, 1E, 1C, IC, or SR on some washers) indicates a system relay error. In most cases, this can be fixed unplugging the washer for about 5 minutes and then plugging it back.

This should reset the error code. If this doesn’t fix the problem, you will have to contact Samsung about the issue.

How To Clear Samsung Washing Machine Error Code 2E

The 2E error code often comes as a result of a temporary control board glitch. To fix this problem, unplug your washing machine for about 10 minutes. You can then plug the washer back.

What Does The Code 5E Mean On A Samsung Washing Machine?

The 5E error code indicates that there is a drainage issue. It often occurs as a result of a blocked drain hose or drain pump.

How To Fix Samsung Washing Machine Error Code TE

The TE (TE1, TE2, or TE3 in some washers) error code indicates a fault with the washer’s temperature sensor. In most cases, this is just a minor system glitch. This can be fixed by unplugging your washing machine for 10 minutes and plugging it back.

Try running a wash cycle with some clothes to see if the error code appears again. If it does, you will have to replace the temperature sensor.

Unfortunately, the location of the temperature sensor and its replacement procedure will vary depending on your washer’s model. Your best option is hiring a professional technician to carry out the repair.

How To Fix Samsung Washing Machine Error Code PE

This error code indicates an issue with the water pressure switch. This switch automatically starts and stops water flow in your washing machine. This ensures that your washer doesn’t get overfilled with water.

If you get the PE error code, you will have to replace the water pressure switch. It is advised that you contact a professional to do this. However, if you are confident about your repair skills, refer to the video below to learn how to do this.

How To Clear Samsung Washing Machine Error Code C6

You don’t need to worry if your Samsung washing machine shows a C6 code. This isn’t an error; it just indicates that the washer is in calibration mode. If you would like to leave calibration mode, simply turn your washer of and turn it on again.

Note: Click here if you would like to learn more about Calibration mode.

How To Clear Samsung Washing Machine Error Code CL

The CL code on a Samsung washer isn’t an error it. It indicates that your washer’s Child Lock function is activated. The buttons which you can use to deactivate this will vary depending on your washer’s model. Please consult your owner’s manual to learn your washer’s specific controls.

Note: Click here to learn about more about Child Lock.

How To Fix Samsung Washing Machine Error Code BC2

A BC2 error code on your Samsung washing machine indicates that a button other than the power button is being held down too long. This isn’t a cause for concern. You clear the error code simply by restarting the machine.

How To Fix Samsung Washing Machine Error Code HE

The HE error pops up when the water being drained from the washer is above 50 degrees Celsius. To get rid of this error code, disconnect your washer from it’s power source for about 30 minutes. Once the 30 minutes are over, plug the washer back.

How To Fix Samsung Washing Machine Error Code LE1

The LE1 error code on a Samsung washing machine indicates that there is a leak somewhere. In some cases, it may be a minor system glitch. Try disconnecting your washer for about 5 minutes and then plugging it back in.

If this doesn’t clear the error code, it may be a sign of improper drain hose installation. To fix this issue, go to the back of your washer. Inspect the drain hose for any kinks or bends. Also ensure that the hose hasn’t been inserted more or less than 6 inches into your home drain.

These seemingly minor things can prevent your washer from draining. Water has to go somewhere; if it can’t go down the drain hose, it will end up leaking from the washing machine.

If the methods above didn’t work for you, your washing machine may have a more serious issue. It is advised that you contact a professional technician to take a look at the issue.

How To Clear Samsung Washing Machine Error Code UC

In most cases, this fault isn’t from the washer. It occurs when the voltage level of the power supply doesn’t meet the washer’s requirements. Your best bet is to call an electrician to inspect your electrical supply.

If this does not resolve the issue, (this rarely occurs) you may have to contact Samsung customer care to diagnose the issue.

How To Clear Samsung Washing Machine Error Code CC

This error code pops up when there is a water cooling problem. This is caused by improper connection of water inlet hoses. Ensure that the Hot and Cold hoses are connected to their corresponding ports on the washer.

The hose for hot water has a red valve, while the hose for cold water has a blue valve. The water inlet ports on the washer has a similar color coding. Make sure you don’t mix these two up.

How To Clear Samsung Washing Machine Error Code FE

An FE error on a Samsung washing machine indicates an issue with the drying fan. This means the washer can’t dry your clothes. Before you freak out, you need to remember that it could be a false message.

Before attempting anything else, unplug your washer from its power source for about 15 minutes and plug it back. This will reset any false messages the system might be displaying.

If this doesn’t clear the error, your washer’s fan will need to undergo serious repairs. It is not advised for you to attempt this repair yourself, as you could end up damaging different components. Your best option is to call a professional repair service.

Leave a Comment