LG Washing Machine Draining [How To/Issues & Solutions]

If you are having issues with your LG washing machine draining, you’ve come to the right place. In this easy-to-follow guide, we’ll be giving you a list of common issues and how to fix them.

Do keep in mind that you will need some skill with appliance repair to carry these steps out. If you experience any difficulty, please stop the repair at once to avoid damaging any parts. So, with that being said, let’s begin…

How To Drain LG Washing Machine — Quick Fix

Here’s how to drain water from your LG washing machine…

Step 1. Turn off your washing machine’s water and power supply to avoid electrocution or water leakage.

Step 2. Place some rags or old towels on the ground in front of your washing machine.

Step 3. Flip open the little panel in front of your washing machine at the bottom.

Step 4. Under the panel, you’ll find a short capped hose; pull the hose out a few inches.

Step 5. Place a container under the hose.

Step 6. Pull the hose’s cap off and let any water that may be in the washer’s drum drain out.

Step 7. Once all the water in the washer has drained out, put the hose’s cap back on and push the hose back in place.

Step 8. Turn the knob beside the hose counterclockwise and pull it out (this is the drain pump filter).

Step 9. Take the filter to a sink and rinse out any lint or debris that may have accumulated in it.

Step 10. Once the filter is clean, put in place and turn it clockwise to secure.

Step 11. Flip the panel back in place.

Check out these other articles…

LG Washing Machine Overflowing [How To Fix]

LG Washing Machine Error Codes [Solved]

LG Washing Machine Is Flashing [Issues & Solutions]

How To Install LG Washing Machine [Detailed Guide]

How To Unlock An LG Washing Machine [A Guide]

LG Washing Machine Leaking [Issues & Solutions]

LG Washing Machine Filling [Issues & Solutions]

LG Washing Machine Not Draining — How To Fix

Here are the different things that could keep your washing machine from draining and how to fix them…

1.Clogged Drain Filter

If left for a long period of time, the drain pump filter on your LG washing machine will accumulate debris and lint. This will block water from flowing out of the machine. Here’s how to fix this issue…

Step 1. Turn off your washing machine’s water and power supply to avoid electrocution or water leakage.

Step 2. Flip open the panel in front of your washing machine at the bottom.

Step 3. Place some rags on the floor in front of your washing machine.

Step 4. Under the panel, you’ll find a short hose with a cap; pull the hose out a few inches.

Step 5. Place a container under the hose.

Step 6. Pull the hose’s cap off and drain out any water that may be in the washing machine’s drum.

Step 7. Once all the water has drained out, put the hose’s cap back on and push the hose back in place.

Step 8. Turn the knob beside the hose counterclockwise and take it out of the washing machine (this is the drain pump filter).

Step 9. Take the drain filter to a sink and clear out any dirt that may be clogging it.

Step 10. Once the filter is clean, put it back in place and turn it clockwise to secure it.

Step 11. Flip the covering panel back up.

Step 12. Turn on your washing machine’s water and power supply.

Step 13. Run a wash cycle to see if the issue has been resolved.

2.Improper Drain Hose Installation

If your washer’s drain hose isn’t properly installed, water won’t drain out as it should. Here’s what to do about this LG washing machine draining issue…

Step 1. Turn off your washing machine’s water and power supply to avoid electrocution or water leakage.

Step 2. Go to the back of your washing machine.

Step 3. Ensure that the drain hose is securely connected to the back of the washing machine.

Step 4. Ensure that the drain hose isn’t inserted more than eight inches into your home drain. It also be inserted less than six inches.

Step 5. Turn on your washing machine’s water and power supply.

Step 6. Run a wash cycle to see if the issue has been resolved.

3.Defective Drain Pump

The drain pump on an LG washing machine is responsible for pumping all the waste water to the drain hose. If this part is defective, water won’t drain out of the washing machine as it should. Here’s how to replace a defective drain pump on your washing machine…

Step 1. Turn off your washing machine’s water and power supply to avoid electrocution and water leakage.

See also  LG Washing Machine Won’t Agitate [How To Fix]

Step 2. Using a Philips screwdriver, remove the two screws at the back of the washing machine holding the top panel.

Step 3. With the screws removed, slide the panel back a few inches and lift it off the washing machine.

Step 4. Pull out the detergent drawer and press the blue tab in the middle to pull it out completely.

Step 5. Using a Philips screwdriver, remove the screws on each side of the detergent drawer housing.

Step 6. Using a flat-blade screwdriver, release the two clips behind the user control panel.

Step 7. Detach the user control panel from the washing machine and lay it on top of the cabinet frame.

Step 8. Flip open the filter covering panel at the lower front of your washing machine.

Step 9. Pull out the emergency drain hose.

Step 10. Using a Philips screwdriver, take out the screw next to the hose.

Step 11. Pull the filter cover assembly out of the washing machine.

Step 12. Open the door of your washing machine.

Step 13. Wedge a flat-blade screwdriver under the wire retaining band around the door seal and work your way around until the entire thing comes out.

Step 14. Peel the door seal back a bit.

Step 15. Reach in behind the door seal and detach the electrical connector attached to the door lock assembly.

Step 16. Remove the two screws securing the main front of the washing machine (one at each corner).

Step 17. Take out the three Philips screws at the bottom of the washer’s main front.

Step 18. Lift the main front up and out of the washing machine.

Step 19. Take out the three Philips screws around the drain pump filter.

Step 20. Take a photo of orientation of drain pump before disconnecting anything.

Step 21. Using a pair of pliers, press the clamps on the hoses connected to the drain pump and slide them out of place.

Step 22. Detach the hoses from the drain pump.

Step 23. Detach the electrical connector attached to the drain pump.

Step 24. Pull the drain pump assembly out of the washing machine.

Step 25. Get your new drain pump out of its pack.

Step 26. Pop the new drain pump in the same position as the one you removed.

Step 27. Pass the emergency drain hose on the new drain pump through the hole on the washer frame.

Step 28. Secure the new drain pump by applying the three screws around the drain pump filter.

Step 29. Using the photo on your phone as a reference, connect each hose to its appropriate port on the new drain pump.

Step 30. Secure the hoses to the drain pump by sliding the clamp on each hose in place.

Step 31. Attach the electrical connector to the new drain pump.

Step 32. Put the main front of the washer back on (two at the top and three at the bottom).

Step 33. Open the door of the washing machine.

Step 34. Reach in behind the door seal and reconnect the door lock’s electrical connector.

Step 35. Put the door seal back in place around the door opening.

Step 36. Fit the retaining band around the door seal (you may need a flat-blade screwdriver to do this).

Step 37. Close the door of your washing machine.

Step 38. Put the lower front of your washer back on and secure it with the Philips screw.

Step 39. Snap the user control pane back in place and secure it by applying the screws on each side of the detergent drawer housing.

Step 40. Put the detergent drawer back in.

Step 41. Put the washer’s control panel back on and secure it by applying the two screws at the back.

Step 42.Turn on your washing machine’s water and power supply.

Step 43. Run a wash cycle to see if the issue has been resolved.

How To Unclog Drain Hose On My LG Washing Machine

Take the following steps to unclog the drain hose on your LG washing machine…

Step 1. Turn off your washing machine’s water and power supply to avoid electrocution or water leakage.

Step 2. Go to the back of your washing machine.

Step 3. Detach the drain hose from the back of your washing machine.

Step 4. Pull the drain hose out of your home drain.

Step 5. Fill a bucket with boiling water and about one cup of baking soda.

Step 6. Using a funnel, repeatedly pour the mixture through the hose.

Step 7. After pouring the mixture through the hose a few times, take the hose to a high pressure tap and try running the water through the hose.

Step 8. If water still doesn’t flow through the hose freely, get a drain snake.

Step 9. Insert the drain snake into the hose until you get to the blockage.

Step 10. Push the drain snake in and out of the hose while turning it in circular motion until you push the blockage out.

Step 11. Run the hot water through the hose one more time to clear any remaining remaining debris.

Step 12. Connect the drain hose back to your washing machine.

Do LG Washing Machines Come With A Drain Hose?

When you buy a brand-new LG washing machine, a drain hose will be included in the package.

How To Clean An LG Washing Machine Drain Filter — Quick Solution

Do the following to clean the drain filter on your LG washing machine…

Step 1. Turn off your washing machine’s water and power supply to avoid electrocution and water leakage.

See also  LG Washing Machine Leaking [Issues & Solutions]

Step 2. Place some rags or old towels on the ground in front of your washing machine.

Step 3. Flip open the little panel at the lower front of your washing machine.

Step 4. Pull out the capped hose under the panel.

Step 5. Place a container under the hose.

Step 6. Pull the hose’s cap off and let any water that may be stuck in the washer’s drum drain out.

Step 7. Once all the water has drained out, put the hose’s cap back on and push the hose back in place.

Step 8. Turn the knob beside the drain hose counterclockwise and pull it out (this is the drain pump filter).

Step 9. Take the drain pump filter to a sink and clear out any lint or debris that may be clogging it.

Step 10. Scrub the filter with a soft brush and rinse thoroughly.

Step 11. Once the filter is clean, put it back in place and turn it clockwise to secure.

Step 12. Flip the filter housing cover back up.

LG Washing Machine Won’t Spin Or Drain — How To Fix

Your LG washing machine won’t spin if water is still in the tub. If your washing machine isn’t draining water as it should, here are some things you should check…

1.Dirty Drain Filter

This is the most common cause of drainage issues in washing machines. If the drain filter on your washing machine is clogged, water won’t drain out as it should. Here’s how to clean a drain filter on your LG washing machine…

Step 1. Turn off your washing machine’s water and power supply to avoid electrocution or water leakage.

Step 2. Place some towels and or rags on the ground in front of your washing machine.

Step 3. Flip open the little panel at the lower front of your washing machine.

Step 4. Pull out the capped hose under the panel.

Step 5. Place a container under the hose.

Step 6. Pull the hose’s cap off and let any water that may be stuck in tje washing machine drain out.

Step 7. Once all the water has drained out, put the hose’s cap back on and push the hose back in place.

Step 8. Turn the knob beside the hose counterclockwise and take it out (this is the drain pump filter).

Step 9. Take the filter to a sink and clean out any lint or debris that may have accumulated in it.

Step 10. Once the filter is clean, put it back in place and turn it clockwise to secure.

Step 11. Flip the filter housing panel back up.

Step 12. Turn on your washing machine’s water and power supply.

Step 13. Run a wash cycle to see if the issue has been resolved.

2.Defective Drain Pump

Do the following to replace the drain pump on your LG washing machine…

Step 1. Turn off your washing machine’s water and power supply to avoid electrocution and water leakage.

Step 2. Using a Philips screwdriver, take out the screws at the back of your washing machine holding the top panel.

Step 3. With the screws removed, slide the panel back a few inches and lift it off the washing machine.

Step 4. Pull out the detergent drawer and press the blue tab in the middle to take it out completely.

Step 5. Using a Philips screwdriver, take out the screws on either side of the detergent drawer housing.

Step 6. Using a flat-blade screwdriver, release the tabs holding the user control panel in place.

Step 7. Detach the panel from the washing machine and lay it on top of the cabinet frame.

Step 8. Flip open the panel at the lower front of your washing machine.

Step 9. Pull out the capped hose under the panel.

Step 10. Using a Philips screwdriver, take out the screw behind the emergency drain hose.

Step 11. Pull lower front panel off the washing machine.

Step 12. Open the door of your washing machine.

Step 13. Wedge a flat-blade screwdriver under the retaining wire around the door seal.

Step 14. Work your way around the wire with the screwdriver until you can take the whole wire out.

Step 15. Peel the door seal back from the door opening and push it into the washing machine’s tub.

Step 16. Reach in behind the door seal and detach the electrical connector attached to the door lock assembly.

Step 17. Using your Philips screwdriver, take out the screws holding the main front of the washing machine (two at the top and three at the bottom).

Step 18. Pull the main front up and out of the washing machine.

Step 16. Take out the three Philips screws around the drain pump filter

Step 17. Using your phone, take a picture of the orientation of the drain pump before detaching anything.

Step 18. Using a pair of pliers, press the clips holding the hoses to the drain pump and slide them out of place.

Step 19. Detach the hoses from the drain pump.

Step 20. Detach the electrical connector attached to the drain pump.

Step 21. Pull the drain pump assembly out of the washing machine and set it aside.

Step 22. Get your new drain pump out of its pack.

Step 23. Install the new drain pump in the same position as the one you removed.

Step 24. Pass the new emergency drain tube through the appropriate opening on the washing machine.

See also  How To Unlock An LG Washing Machine [A Guide]

Step 25. Attach each hose to its appropriate port on the new drain pump (use the images on your phone for reference if needed).

Step 26. Secure the new hoses to the new drain pump by sliding the clam on each hose in place.

Step 27. Reapply the three screws around the drain pump filter cap.

Step 28. Put the main front of the machine back on and secure it by applying the five screws (two at the top and three at the bottom).

Step 29. Put the lower front of the washing machine back in place and pass the new emergency drain tube through the provided opening.

Step 30. Secure the lower front of the washing machine by applying the screw beside the emergency drain tube.

Step 31. Open the door of the washing machine.

Step 32. Reach in behind the door lock assembly and reattach the electrical connector.

Step 33. Fit the door seal back around the door opening.

Step 34. Fit the retaining band around the door seal (you may need a flat-blade screwdriver to do this).

Step 35. Close the door of your washing machine.

Step 36. Snap your washing machine’s user control panel back in place and secure it by applying the screws on each side of the detergent drawer housing.

Step 37. Put the detergent drawer back in the washing machine.

Step 38. Put the main top of the washing machine back on.

Step 39. Secure the main top of the washing machine by applying the screws at the back.

Step 40. Turn on your washing machine’s water and power supply.

Step 41. Run a wash cycle to see if the issue has been resolved.

Note: Please keep in mind that the repair process may vary greatly depending on the model of your washing machine.

LG Top Loader Washing machine Not Draining — Solution

Here’s what to do if your LG top loader washing machine isn’t draining…

Step 1. Turn off your washing machine’s water and power supply to avoid water leakage and electrocution.

Step 2. Using a Philips screwdriver, take out the screws holding the back panel of the washing machine.

Step 3. Lift the panel up and pull it out of the washing machine.

Step 4. Press the clamps on the hoses connected to the drain pump.

Step 5. Pull each hose off the drain pump.

Step 6. Using a 10mm socket wrench, take out the bolts holding the drain pump to the washing machine (one on each side).

Step 7. Detach the electrical connector attached to the drain pump.

Step 8. Detach the drain pump wire sleeve from the retaining tabs.

Step 9. Untwist the retaining wire holding the bundle of wires to the washer’s frame.

Step 10. Fully detach the electrical connectors of the drain pump.

Step 11. Pull the old drain pump assembly out of the washing machine.

Step 12. Get your new drain pump out of its pack.

Step 13. Install the new drain pump in the same position as the one you removed.

Step 14. To secure the drain pump to the washing machine, use the 10mm socket wrench to apply the bolts on the new drain pump.

Step 15. Attach the electrical connectors to the bundle of connectors at the side panel.

Step 16. Using the retaining wire, secure the bundle of connectors to the washer’s frame.

Step 17. Use the tabs on the washer’s base to secure the wire sleeve.

Step 18. Attach the drain pump’s main wire connector.

Step 19. Connect the two hoses to the drain pump and secure them by sliding the retaining clamp on each on in place.

Step 20. Put the rear panel of the washing machine back on and secure it by applying the screws.

Step 21. Turn on your washing machine’s water and power supply.

Step 22. Run a wash cycle to see if the issue has been resolved.

Note: Please keep in mind that the process of replacing a washing machine drain pump will depend on the model of your washer. If you couldn’t follow the procedure above, please contact a washer repair service to help you.

LG Washing Machine Making Noise When Draining — Fixed

Here’s what to do if your LG washing machine is making noise when draining…

Step 1. Turn off your washing machine’s water and power supply to avoid water leakage and electrocution.

Step 2. Place some rags or old towels on the ground in front of your washing machine.

Step 3. Flip open the little panel at the lower front of your washing machine.

Step 4. Pull out the capped tube under the panel.

Step 5. Place a container under the tube.

Step 6. Pull the tube’s cap off and let any water that may be stuck in the washer’s tub drain out.

Step 7. Once all the water has drained out, put the hose’s cap back on and push the hose back in place.

Step 8. Turn the knob beside the hose counterclockwise and pull it out (this is the drain pump filter).

Step 9. Take the drain pump filter to a sink and clean out any foreign objects that may be clogging it.

Step 10. Rise the filter thoroughly and put it back in place (turn it clockwise to secure).

Step 11. Flip the filter cover up.

Step 12. Turn on your washing machine’s water and power supply.

Step 13. Run a wash cycle to see if the issue has been resolved.

LG Washing Machine Leaking From Drain Filter — How To Fix

Here’s what to do if water is leaking from your washing machine’s drain filter…

Step 1. Turn off your washing machine’s water and power supply.

Step 2. Flip open the drain filter cover at the lower front of your washing machine.

Step 3. Turn the drain filter cap clockwise until you can’t turn it any further.

Step 4. Flip the filter cover back up.

Step 5. Turn on your washing machine’s water and power supply.

Step 6. Run a wash cycle to see if the issue has been resolved.