If you are having issues with your Bosch washing machine door, this easy-to-follow guide gives you steps on what to do…
Table of Contents
How To Replace Bosch Washing Machine Door Hinge — Solved
To replace the hinge in your Bosch washing machine door, here are the steps you’ll need to take…
Step 1. Open the door of your washing machine and use a Torx screwdriver to loosen the screws holding the door hinge to the front of the cabinet.
Step 2. Lift the door assembly off the cabinet and set it on the floor. Use your Torx screwdriver to loosen the screws holding the inner door frame. Lift the inner frame slightly, then pull the door hinge out.
Step 3. Pull the plastic caps off the ends of the door hinge. Discard the old door hinge and remove the new one from its packaging.
Step 4. Snap the two caps onto the ends of the new hinge assembly. Lift the inner frame and push the new door hinge into place.
Step 5. Secure the door assembly by applying the screws with your Torx screwdriver. Lift the door assembly and mount it onto the cabinet. Secure the door to the cabinet by applying the screws.
How To Replace Bosch Washing Machine Door Glass — Quick Fix
To replace the glass in your Bosch washing machine door, here are the steps you’ll need to take…
Step 1. Disconnect your machine from the power outlet before starting this repair in order to prevent electrical damage.
Step 2. Open the door of your washing machine. Using a Torx screwdriver, remove the screws holding the door hinge to the cabinet. Lift the door assembly off the cabinet and set it face down on the floor.
Step 3. Use your Torx screwdriver to loosen the screws holding the inner door frame to the assembly. Turn the assembly over and let the inner door frame drop down.
Step 4. Lift the outer door frame off the assembly and set it aside. Lift the plastic frame off door glass. Discard the old washing machine door glass and remove the new one from its packaging.
Step 5. Place the plastic frame on the new door glass. Put the outer door frame onto the new glass.
Step 6. Turn the assembly over and put the inner door frame on the door assembly. Secure the two halves by applying the screws with your Torx screwdriver.
Step 7. Lift the door assembly and mount it on the cabinet. Apply the screws with your Torx screwdriver to secure the door hinge to the cabinet. Plug the power cord back into the electrical outlet.
Check out these other articles…
Bosch Washing Machine Noise [Problems & Solutions]
Bosch Washing Machine Turns Off [Proven Solutions]
Bosch Washing Machine Detergent [How To, Issues & Solutions]
Bosch Washing Machine Won’t Open [Proven Solutions]
Bosch Washing Machine Power [Problems & Solution]
How To Replace Bosch Washing Machine Door Handle — Solution
To replace the door handle in your Bosch washing machine, follow the steps below…
Step 1. In order to prevent electrical damage, ensure that your washing machine’s power cord is disconnected from the outlet before starting this repair.
Step 2. Open your machine’s door and use a Torx screwdriver to loosen the nuts holding the door hinges to the cabinet. Pull the door assembly off the machine.
Step 3. Set the door assembly face-down on a flat surface. Use your screwdriver to loosen the screws holding the inner door frame to the assembly. Lift the inner door frame and door glass, then set them aside.
Step 4. Turn the outer door frame over and set it down. Wedge a flat-blade screwdriver under the door catch and spring assembly to release it.
Step 5. Carefully pull the door handle off the outer door frame, then discard it. Remove your new washing machine door handle from its packaging.
Step 6. Push the new door handle into place on the frame. Snap the spring and catch assembly back onto the door frame.
Step 7. Put the door assembly pieces back together, then use your Torx screwdriver to apply the screws.
Step 8. Lift the door assembly and mount it onto the front of the cabinet. Secure the door to the panel by applying the screws with your Torx screwdriver. Plug your machine back into the electrical outlet.
