Electrolux Washing Machine Keeps Filling With Water [How To Fix]

If your Electrolux washing machine keeps filling with water, this quick and easy guide will provide steps on how to solve the problem. So, without wasting any more time, let’s get right to it…

Electrolux Washing Machine Keeps Filling With Water — Solution

If your Electrolux washing machine keeps filling with water, here are the problems you should look for…

1. Faulty Water Pressure Switch

A damaged water pressure switch is the most common cause of an overflowing washing machine. The pressure switch monitors the water level and signals the water inlet valve to turn off at the appropriate time.

If the pressure switch gets damaged, the water inlet valve will not turn off, and will cause the drum to overfill. To learn how to replace a failed water pressure switch in your Electrolux washing machine, read this guide.

2. Control Board Is Defective

If your Electrolux washing machine still keeps filling even after replacing the water pressure switch, the next thing you should check is the control board. In some cases, the control board may be defective and in need of replacement. To learn how to do this, read this article.

3. Damaged Water Inlet Valves

If your Electrolux washing machine keeps filling with water, it is most likely as a result of a damaged water inlet valve. The inlet valve as are mounted at the back of the machine and control how much water flows into the machine.

See also  Amana Washing Machine Not Spinning [Solution]

If the valve is damaged, the water supply will not be able to turn off. For detailed steps on how to replace the water inlet valve in your Electrolux washing machine, read this article.

Check out these other articles…

How To Clean Electrolux Washing Machine [Detailed Guide]

How To Reset Electrolux Washing Machine [Detailed Guide]

Electrolux Washing Machine Error Codes [Quick Fixes]

Electrolux Washing Machine Noise [Problems & Solutions]

Electrolux Washing Machine Leaking [How To Fix]

Electrolux Pedestals [Detailed Guide]

Electrolux Washing Machine Buttons [Issues & Solutions]

Electrolux Washing Machine Keeps Filling With Water When Off — Solved

If your Electrolux washing machine keeps filling with water even though the power cord is unplugged, it indicates that the water inlet valve is damaged. The inlet valve controls the water flow into the drum.

If the inlet valve fails, the water supply will not turn off. In some cases, a damaged water inlet valve could prevent your washing machine from filling at all. For detailed instructions on how to replace the water inlet valve in your Electrolux washing machine, click here.