Samsung Washing Machine Keeps Beeping [Causes & Solutions]

If your Samsung washing machine keeps beeping, you’ve come to the right place. we’ll be explaining the things that could cause this issue, and how to resolve them. with that being said, let’s get right to it…

Why Does My Samsung Washing Machine Keep Beeping?

There are various reasons why your Samsung washing machine keeps beeping. In most cases, the beeping is an indication of an error in the washer. In other cases, it may be as a result of pressing buttons on the washer when Child Lock is activated.

My Samsung Washing Machine Keeps Beeping – How To Fix

As said above, a beep on a Samsung washing machine often indicates an error. However, if you’re sick of hearing beeps all the time, there’s some good news; you ca actually mute the machine.

It’s important for you to keep in mind that the buttons which deactivate sound will vary depending on your washer. For some washers, all you have to do is press the Rinse and Spin buttons simultaneously and hold for 3 seconds.

If this one doesn’t work for your washer, look for a volume icon on your washer’s display. It should have two lines which point to the buttons you need to press.

Samsung Washing Machine Beeping DC

If your Samsung washing machine keeps beeping while showing the DC code, it means the load in the washer is unbalanced. When this message pops up on your washer’s display, the machine won’t be able to spin.

This issue is always caused by putting to many or too little items in the washer. For instance, if you put only 1 towel in the washer, the DC error will pop up. You will also get the same message if cram the washer full with duvets, bed covers, and other such items.

See also  Samsung Washing Machine Says… [Issues & Solutions]

To fix this problem ensure that you put a moderate load in the washer. Also make sure to spread the laundry evenly in the drum.

Note: If your Samsung washing machine keeps beeping after this, your washer may have a more serious issue. Please consult a technician if this is the case.

Samsung Washing Machine Beeping UB

If your Samsung washing machine keeps beeping while displaying the UB code, it means the load in the washer isn’t balanced. To resolve this problem, ensure that you put a moderate quantity of clothes in the washer. Also remember to spread the load evenly in the drum.

Note: Click here to learn more about this.

Samsung Washing Machine Beeping SC

If your Samsung washing machine keeps beeping while displaying the code SC (also read as 5C), it indicates that there is a drainage issue. Here’s how to fix this problem…

For Front Loaders

Here’s how to drain water from your Samsung front loader washing machine…

Step 1. Disconnect your washer’s water and power supply to avoid damage and electrocution.

Step 2. Get a container and some towels.

Step 3. Place the towels on the ground in front of your washer.

Step 4. Press the little panel in front of your washer at the bottom.

Step 5. Underneath the panel, you will find a small hose with a cap. Pull the hose out a few inches and remove the cap.

Step 6. Place the container underneath the hose and let any water in the washer drain out completely.

Step 7. Put the hose’s cap back on and put the hose back in place.

Step 8. Turn the knob beside the hose counterclockwise and pull out out (this is the debris filter).

Step 9. Run remove any debris or lint in the filter and run some tap water over it.

Step 10. Once the filter is clean, put it back in place and turn it clockwise.

See also  Amana Washing Machine Not Working [How To Fix]

Step 11. Go to the back of the washer.

Step 12. Inspect the washer’s drain hose or any bends or kinks. If the hose is damaged, it will need replacement.

Step 13. Ensure that the drain hose hasn’t been inserted any more or any less than 6 inches.

Step 14. Ensure that the hose is suspended at a minimum height of 18 inches and a maximum height of 96 inches.

For Top Loaders

Here’s how to drain water from your Samsung top loader washing machine…

Step 1. Disconnect your washer from its power and water supply.

Step 2. Get a container.

Step 3. Scoop out as much water as you can from the washer and empty it into a sink.

Step 4. Connect your washer’s power supply.

Step 5. Run a spin cycle to get rid of any water that may be in the washer.

Step 6. Use a rag to thoroughly dry the drum.

Step 7. Go to the back of your washing machine.

Step 8. Inspect the washer’s drain hose or any bends or kinks. If the hose is damaged, it will need to be replaced.

Step 9. Ensure that the drain hose hasn’t been inserted any more or any less than 6 inches.

Step 10. Ensure that the hose is suspended at a minimum height of 18 inches and a maximum height of 96 inches.

Note: Click here if your Samsung washing machine is displaying other error codes.

Samsung Washing Machine Beeping 4C

If your Samsung washing machine keeps beeping while displaying the 4C error code, it indicates that there is a problem with the water supply. Here’s how to fix this problem…

Step 1. Turn of your washer’s water and power supply.

Step 2. Disconnect the Hot and Cold water inlet hoses from the back of the washer.

Step 3. Disconnect the hoses from your home water supply.

Step 4. You will find a little mesh filter in each of the water inlet ports on the washer. Use a pair of pliers to pull them out.

See also  How To Use Bosch Washing Machine [Detailed Guide]

Step 5. Clean the filters thoroughly by running some tap water over them.

Step 6. Put the filters back in place once they are clean.

Step 7. Take the water inlet hoses to a tap and try running water through them.

Step 8. Push a wire through the hoses to remove anything that may be clogging them

Step 9. Run some water through the hoses again to ensure that they aren’t clogged.

Step 10. Check the pressure of your water supply. Ensure that it is at least 20psi. You may have to get a plumber to do this for you.

Step 11. Connect the hoses back to your home water supply.

Step 12. Connect the hoses back to the washing machine.

Step 13. Turn on your washer’s water and power supply. Ensure that the water valve is fully opened.

Step 14. Run a wash cycle to ensure that the issue has been fixed.



Check out these other articles…

Samsung Washing Machine Error Codes [How To Fix]

Samsung Washing Machine Keeps Adding Time [Proven Solutions]

How To Use A Samsung Washing Machine [Detailed Guide]

How To Install A Samsung Washing Machine [Step-By-Step Guide]

Samsung Washing Machine Fills With Water Then Stops [Easy Solutions]

Samsung Washing Machine Spin [Issues & Solutions]

Samsung Washing Machine Not Starting [How To Fix]



Samsung Washing Machine Beeping UE

If your Samsung washing machine keeps beeping while displaying the error code UE, it indicates that the load in the washer isn’t balanced. This is caused by putting too many items into the washer. This makes it difficult for the drum to spin. You can also get this error code if you put a very small amount of laundry in the washer.

This issue could also occur if your washing machine is not sitting on an even surface. To fix this problem, all you need to do is put a moderate amount clothes in the washer whenever you’re doing laundry.

You should also ensure that the washing machine sits on an even surface. Also remember to spread the laundry evenly in the drum.

Note: If your Samsung washing machine keeps beeping after this, your washer may have a more serious issue. Please consult a technician if this is the case.

Leave a Comment